Home
Product Line
Waste Water
Filter Presses
Water Testing Products
Agitators /  Mixers
Pumps
Disposal Containers
Filter Systems
Tanks
Instruments
Chemicals
Contact Us
 
 
 

 


 

    Filter Systems
    1 888 777-4516
.
       

 

   
 
   
   
 
 
 


The Reverse Osmosis process uses a semi-permeable membrane to separate and remove dissolved solids, organics, pyrogens, submicron colloidal matter, viruses, and bacteria from water. The process is called "reverse" osmosis since it requires pressure to force pure water across a membrane, leaving the impurities behind. Reverse Osmosis is capable of removing 95%-99% of the total dissolved solids (TDS) and 99% of all bacteria, thus providing safe, pure water. 

 

   
 
   
 
 
 
 
 
Crane - division of newterra
Click on Picture Below for Larger Image

OPTIONAL FEATURES:
.380V/50Hz

.
Anti-Scalant Dosing System
. Chlorination Dosing System
. De-Chlorination Dosing System

.
Acid Dosing System
.
pH Elevation Dosing System
.
pH Monitor/Controller
. ORP Monitor/Controller
. Upgrade Pump from 304SS to 316SS
. "Cold Water" Membranes
. Recycle Flow Meter
. Integrated Cleaning Station, with tank off the skid (CIP)
. Nanofiltration membranes are available

.
High Pressure Switch
.
Single Powered Point

 

STANDARD FEATURES: 

. Flow Meters: Ooncentrate & Permeate (Digital)
. Grundfos CR-Series 304 SS Pump w/TEFC Motor
 . Membranes: 8"x40", TFC Brackish Water
. FRP Side-ported, 300 psi Pressure Vessels
. Low Pressure Switch

.
Voltage: 460V/60Hz/3 Phase
.
Prefilter Housing: 316SS w/5 micron cartridges
.
Pressure Gauges: 2.5" Dia., 316SS, Pre & Post-filter
, Pump Discharge, Concentrate, Permeate
. Automatic Inlet Feedwater Valve
. 316SS High Pre"ssure Valves (Concentrate, Recycle)
. Flow Meters: Concentrate & Permeate (Digital)
. Programmable Electronic Control Box
. Automatic Fast Flush

.
TDS Monitor
.
Concentrate Recycle Loop
.
Sample Valves
.
Cleaning Ports
. High Pressure Piping: 316SS

 

EPRO Series Commercial Reverse Osmosis Systems 1,500 to 10,000 Gal/Day

EPRO - 10,000

                                    
 

 

   
 
   
     
   
 

 

 
Camac filter units cover a wide range of requirements from 300 to 14,000 GPH utilizing a variety of media and carbon treatment types. Models are available with vertical pumps, horizontal mechanical seal pumps and magnetic drive pumps. Slurry systems and backwashing capabilities are among a wide variety of options available. Plastic or Rubber Lined Steel construction is standard.

ALL NEW DISC FILTER SYSTEM  
   

A cost-effective, high performance and environment-friendly solution to filtration is now available from CAMAC Industries. The new series of Disc Filter Systems provides excellent particle removal at low cost without sacrificing performance.

CAMAC Disc Filter Systems offer flow ratings as high as 8000 gallons per hour and filtration surface area of up to 5600 square inches. The use of horizontal discs in the filtration process increases volume, reduces contamination, and lowers filtration media disposal costs.

CAMAC Disc Filter Systems are constructed of durable Polypro, PVC or CPVC. No metal comes in contact with the solution.

GUARANTEED NOT TO BY-PASS THE CONTAMINANTS THAT LEAD TO SURFACE ROUGHNESS AND REJECTED PARTS


The filter disc will pre-coat much more readily and uniformly. (The horizontal disc is thereby working in conjunction with gravity). The disc is consequently more efficient in particle retention than most cartridges with the same micron rating. The disc will also accept pre-coat more evenly and gravity keeps it in place.

Even small amounts of DE or powdered carbon migrating into the bath can result in hundreds (or even thousands) of roughness rejects.

The interlocking horizontal discs insure positive sealing and are guaranteed not to by-pass the contaminants that lead to surface roughness and rejected parts.

DISC PACKS

The use of Disc Packs in CAMAC's new Disc Filter Systems is a key advance in filtration technology. The horizontal placement of discs enhances particle removal by increasing the surface area available for filtration and reduces the risk of contaminants and pre-coating materials falling into the bath. The results are fewer plating rejects, more efficient operation and longer filter life.

An environment-friendly solution to filtration needs, the discs offer lower disposal costs and less waste. A standard 55 gallon waste drum can hold approximately 75 ten inch tubes. The same drum can hold several thousand discs.

SYSTEM FEATURES:

* All CAMAC filter systems are supplied with a plastic base. Casters are available for easy movement.
* Easily cleaned.
* Maintenance valve at filter intake is standard on all units.
* Units are available with slurry tank systems complete with interconnecting valves, piping and fittings.
* Horizontal centrifugal pumps are equipped with non-metallic, bellows type seals or optional water cooled seals.
* Vertical immersion pumps are seal-free and self-priming.
* Magnetic drive pumps employ a completely seal-less design with an orbital magnetic coupling. O-ring design
* Choice of connection sizes
* Carbon treatment systems
* Interlocking horizontal discs

 
              

             Carbon Polish Recycling

              F/CP2X-8PVC
     
   
     
 

HYDRO

     
   
  HYDRO, Inc Home of the
HYDRO-PLEX and JENCEL
ultra pure water systems
   


Laboratory - Pharmaceutical - Industrial

Circulating Deionization
Reverse Osmosis System

Designed to meet
CAP/ASTM/NCCLS/USP standards
at your flow demands.

Featured: 1200 gpd RO Production
100 gallon PE conical Storage
7 gpm DI Circulation

Manufactured by
Hydro, Inc., Atlanta, GA

 References to satisfied customers
in your field are available.

     
   
     
     
    Home Product Line Waste Water Filter Presses Water Testing Products Agitators /  Mixers Pumps Disposal Containers Filter Systems Tanks Instruments Chemicals Contact Us
     
   
Copyright 2016 Midstates Engineered Equipment  Web Design Crescent Design LLC